SPXFLOW High Purity Pumps
Keep your Process Moving
SPXFLOW’s wide variety of high-purity, hygenic, sanitary, and industrial pumps are the heart of your critical process system. With positive displacement and centrifugal options available, RHFS can meet your fluid conveyance requirements. When paired with our complementary product lines, including valves, filtration, tanks, and automation, RHFS will keep your process moving smoothly!
Universal 3 Series Positive Displacement Pumps
The Universal 3 Series is the latest addition to the Waukesha positive displacement pump family by SPX FLOW. It offers a front loading seal design with no bearings in the product zone. Operating pressure capacities up to 500 psi (34.5 bar) and standard 316L stainless steel body and cover makes this an attractive hygienic pump option for your most challenging applications in the food and beverage industry. Assembled and tested in Delavan, WI with “Waukesha 88” non-galling rotors and a standard 304 stainless steel gear case provides an ideal fluid transfer solution that is able to withstand the rigors of daily processing environments.
Long-life Features
- Up to 500 psi (34.5 bar) pressure capability.
- Pumps rated to 300°F (149°C) as standard.
- Special rotor nut designed for extended service without loosening.
- No bearings in the product zone.
- Body retaining screws for maintaining mechanical seal contact during inspection.
- Extended outer seal life. A wave spring, instead of an O-ring, mechanically loads the seal.
- Unique mechanical seal design utilizes 2 pin stationary seal and special design shaft for rotary seal.
Universal Twin Screw Pumps
Universal Twin Screw Series pumps offer reliability, process flexibility, and smooth operation.
Features and Benefits
- Reliable performance - Screws made from Waukesha Alloy 88 non-galling
- material allow the pump to run through incidental contact and reduce risk of
- pump damage if screws make contact
- Gentle product handling - Pumps large particulates without degradation
- Responsive service - Extensive global distribution network with certified repair centers provide quick response times for parts and service
- Easy maintenance - Front loaded access to product side seals
- Process flexibility - Low inlet pressure requirement and a wide range of operating speeds allow for multiple duties including process and CIP supply. Bi-directional flow capability without making modifications to the pump.
- Smooth operation - Reduces slip pulse in low inlet pressure, low viscosity, and high pressure conditions
- Reduced noise levels - Operating principle virtually eliminates pressure fluctuations
Universal 1 Series Positive Displacement Pumps
Waukesha Cherry-Burrell's traditional "Can-Do Pump." Versatile in application, its reliability has made it the industry standard worldwide for more than 50 years.
- Easy cleaning and disassembly
- Flexible, three-way mounting
- Field interchangeable single and double "O" ring and mechanical seals
- Non-galling Waukesha "88" alloy rotors
- 3-A approved
- Maximum pressure: 200 psi (13.8 bar)
- Temperature range: -40°F (-40°C) to 300°F (149°C)
Universal 2 Series Positive Displacement Pumps
Universal 2 Series pumps include advanced sanitation technologies, long life features and installation flexibility.
Features and Benefits
- Bi-directional flow
- Large diameter shafts for greater strength & stiffness
- Rotor/shaft connection sealed from the product zone
- Extended-life outer seal
- Mechanical seals standard
- 316 pump body standard; 316L pump body optional
- Heavy-duty bearing frame; stainless steel bearing frame optional
- Non-galling Waukesha "88" alloy rotors for tighter running clearances and higher efficiencies
- Additional options: CIP capability, free draining body and cover for side mounted applications, seal flushing, steam-in-place, aseptic version
- Maximum pressure: 200-500 psi (13.8-34.5 bar), depending on model
- Temperature range: -40° F (-40° C) to 300° F (149° C)
Universal Lobe Series Positive Displacement Pumps
The Universal Lobe Pumps were specifically designed for a different challenge: lower cost and CIP (clean in place) applications. Universal lobe pumps feature bidirectional flow with a free draining internal flat profile pump body. Uniquely designed Waukesha "88" alloy rotors permit running at tighter clearances and higher efficiencies.
While intended for lower cost, Universal Lobe Pumps are not light duty. They incorporate the advanced technology of the new Universal 2 PD pump that strengthens sanitary performance and extends pump life. They are capable of accommodating high temperatures and pressures up to 300 psi (21 bar).
Universal Lobe Pump Series utilizes the Universal 2 gear case with 3-way mounting flexibility. It offers the full range of seal and port options and has Integral Speed Reducer (ISR) mounting capabilities.
Features and Benefits
- Free draining cover in horizontal or vertical port position
- Rotor/shaft connection sealed from product zone
- Non-galling Waukesha "88" alloy rotors
- Mechanical seals standard; single or flushed double seals optional
- Optional steam-in-place and seal flush
- 316 stainless steel pump body and cover; 316L pump body optional
- Additional options: jacketed cover, steam-in-place and seal flush, stainless steel bearing frame, electropolish of product contact surfaces
- Maximum pressure: 200-300 psi (13.8-20.7 bar
- Temperature range: -40 F (-40 C) to 300 F (149 C)
Industrial Positive Displacement Pumps
High-efficiency rotary Positive Displacement pump configured for a wide variety of industrial applications.
Ideal for pumping low viscosity and non-lubricating fluids, for metering fluids, for gentle pumping of shear-sensitive fluids or for pumping high-viscosity fluids.
Features and Benefits
- Non-galling Waukesha "88" alloy rotors standard
- A variety of mechanical seals and packing available
- Steel-it Paint standard
- Maximum pressure: 200 psi (13.8 bar)
- Temperature range: -40° F (-40° C) to 300° F (149° C)
200 Series Centrifugal Pumps
Adapted from rugged, precision 200 Series design for pumping water for injection; modifications to seal area prevent leakage of contaminants into pumpage.
Although designed for high purity, pyrogen-free fluid used in pharmaceutical products, this pump is ideal for pumping high purity, deionized water, such as that used to rinse and cleanse electronic integrated circuits.
Features
- All wetted parts 316L stainless steel with 32 Ra (150 grit) finish; 20 Ra (240 grit) and electropolish optional
- Single and double seal options: John Crane Type 9, Chesterton 241, silicon carbide, tungsten carbide, FKM, EPDM
- Optional factory-installed flush system with pressure, temperature, flow-rate controls
- Casing drain option
Universal Centrifugal Pumps
UC Centrifugal pumps are designed to achieve lifetime cost savings, lower
energy consumption.
Limited Release. Please contact Sales for product availability in your region.
UC is a comprehensive range of premium sanitary end-suction centrifugal pumps designed with maximum operating benefits and minimal life cycle costs in mind.
- Reliable and heavy duty design
- Energy efficient
- Quiet performance with minimal vibration
- Superior shaft seal design
- High pressure capability
- 3A (optional)
- Designed for CIP (Cleaning In Place) as well as SIP (Sterilizing In Place)
- Suitable for wide variety of food, beverage and pharmaceutical products
- Wide range of optional features available
- Easy and cost effective maintenance
C-Series Centrifugal Pumps
This pump offers strong performance and competitive price/value within the lower spectrum of heavy-duty, centrifugal pump applications. It can be installed in a series without fear of seal failure from elevated inlet pressures, even with viscous products.
- Hydraulic balancing reduces pressure at sealing surface for less wear, greater efficiency
- Easy-cleaning, open type impeller delivers smooth pumping performance
- Enlarged inlets available for larger suction lines
- Standard CIP capability